|
| |
Scene Design Rules
CHOICE OF PLAYS
The student may choose any play from the list announced by the State Board of Directors
in the September issue of the Florida State Thespian web page.
RULES
- The student must construct an original, three dimensional model OR perspective rendering
executed to the scale of EITHER 1/4" = 1'0"
OR 1/2" = 1'0" showing the set and its relationship to the
theatrical space. Renderings and/or models must be done for
at least one set required in the
production.
- Computer assisted design is acceptable.
- At least one figure must be included in the rendering or model to show proportion and
scale.
- The student must draw a floor plan to the same scale
which justifies the storage and shifting for ALL sets in the show.
- The set is to be designed for a stage with a proscenium opening of 38' w x 20' h,
an apron 6' deep, and
wing space. The stage has a maximum depth of 30' from the proscenium
line to the back wall with a wing measuring 15'x30' on each side. The proscenium arch and wing space must be represented in the model.
- The student must present a justification of the design. Note cards may be used.
- Only one student may be involved in the design. NO COLLABORATION.
- All artwork used must be the original work of the entrant.
- The event will not exceed fifteen (15) minutes. The student presentation is not to
exceed ten (10) of these fifteen (15) minutes.
- A bibliography is required documenting all resources
used including but not limited to written and electronic sources. The
bibliography must be in MLA style.
- Budgetary consideration will not affect adjudication.
|
